Versione 2 del 2013-04-28 18:25:05

Nascondi questo messaggio
Italiano English
Modifica History Actions

FirmwareScooreggione

Scooreggione !

Questo firmware è basato su piccole modifiche a OpenWRT Attitude Adjustment I sorgenti qui: https://github.com/zioproto/attitude_adjustment/tree/AA-zioproto

Aggiornare da un precedente AirOS o Sburratone

0) Entrare in SSH sul device

1) Fai un backup di tutte le tue config in  /etc/persistent  magari ti serve per il futuro

2) Mettersi nella cartella tmp

 cd /tmp/ 

3) Scaricare il firmware con il comando wget

 wget http://URLFIRMWARE -O /tmp/fwupdate.bin 

dove URL FIRMWARE è una di queste a seconda del device che devi flashare: http://stud.netgroup.uniroma2.it/~saverio/scooreggione-AA-v2/

4) Controllare l'MD5 per vedere il firmware è valido o corrotto

 md5sum /tmp/fwupdate.bin 

deve venire il risultato giusto che trovi in questo file:

http://stud.netgroup.uniroma2.it/~saverio/scooreggione-AA-v2/md5sums

5) Se il risultato MD5 è corretto lanciare il seguente comando per aggiornare:

 /sbin/ubntbox fwupdate.real -m /tmp/fwupdate.bin -d

6) Dopo il reboot il device ha sulla LAN indirizzo IP 192.168.1.1, puoi entrare in SSH con utente root password root. La radio di default è spenta.

Note

Questo firmware si fa uso di policy routing. Al boot OLSR viene configurato automaticamente per usare queste tabelle

RtTable 111
RtTableDefault 112

E dentro il tuo /etc/rc.local ha questi comandi:

#110 Local routes
#111 RtTable
#112 RtTableDefault
#113 Special Table for /1
#114 blackholes table

#Copy local routes only from table main 254 to table 110
ip route show table 254 | grep -Ev ^default | grep -Ev ^blackhole | while read ROUTE ; do
MASK=`echo "${ROUTE}" | awk '{print $1}' | awk -F/ '{print $2}'`
if [ "$MASK" -ne 16 ] ; then
ip route add table 110 $ROUTE
fi
done

#First evaluate local routes
ip rule add from all lookup 110 pref 3

#Private routes to OLSR table
ip rule add to 10.0.0.0/8 table 111 pref 4
ip rule add to 172.16.0.0/12 table 111 pref 4
ip rule add to 192.168.0.0/16 table 111 pref 4

#Ninux IP Addresses to OLSR table
ip rule add to 176.62.53.0/24 table 111 pref 4

#Evaluate blackholes
ip rule add from all table 114 pref 5

#Send traffic of public addresses to BGP border routers
ip rule add from 176.62.53.0/24 table 113 pref 6

#Lookup default route first from user and then from OLSR
ip rule add from all lookup 254 pref 7
ip rule add from all lookup 112 pref 8

#Blackhole private aggregates
ip route add blackhole 10.0.0.0/8 table 114
ip route add blackhole 172.16.0.0/12 table 114
ip route add blackhole 192.168.0.0/16 table 114

#Blackhole Ninux aggregate
ip route add blackhole 176.62.53.0/24 table 114

exit 0

Per vedere la tabella di routing imparata via OLSR usa il comando

ip route show table 111

o in breve

ip r s t 111

per vedere la default imparata via OLSR è uguale ma la tabella è la 112

Esempio Configurazione come STA

root@M5GalliaBramante:~# cat /etc/config/network

config interface 'loopback'

  • option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0'

config interface 'lan'

  • option ifname 'eth0' option proto 'static' option ipaddr '10.CAP.x.y' option ip6addr '2001:4c00:893b:CAP::xxxx/64' option netmask '255.255.255.0' option dns '8.8.8.8'

config interface 'backbone'

  • option ifname 'wlan0' option proto 'static' option ipaddr '172.16.CAP.x' option netmask '255.255.0.0' option ip6addr '2001:4c00:893b:1:CAP::x/128'

config interface 'wan'

  • option ifname 'eth1' option proto 'none'

root@M5GalliaBramante:~# cat /etc/config/wireless

config wifi-device 'radio0'

  • option type 'mac80211' option hwmode '11na' option distance '1000' ###Distanza in metri per ACK timeout, option macaddr '00:27:22:38:d0:f1' ###Non cambiare, è il mac della tua antenna list ht_capab 'SHORT-GI-40' list ht_capab 'TX-STBC' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option htmode 'HT40+' ###Setta il canale a 40Mhz option noscan '1'

config wifi-iface

  • option device 'radio0' option network 'backbone' option mode 'sta' #STATION, non specificare channel option ssid 'ninux.org' option bssid 'aa:bb:cc:ee:ff' ###LOCK to this AP option encryption 'none'

root@M5GalliaBramante:~#

Features di Scoorreggione

  • Based on OpenWRT AA
  • tinc to 1.0.21
  • Implementing Routing operation inside the OLSR router as described in the Ninux Architecture

6olsr e 4olsr

Stampano il contenuto del txtinfo plugin di olsr

li potete usare anche con argomenti, esempio:

4olsr links
6olsr hna