Input

book: Create a structured PDF document with headings, chapters, etc.
webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output.
continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title of the document for the front page.
Extract the first heading of the document and use it as title. If checked the title field has no effect.
The title image or HTML page. These file has to be an attachments!
Specify document version to be displayed on the title page.
Intellectual property owner of this document.
Copyright notice for this document.
Information about who and when modified the document are applied at the end.

Output

Specifies the output format.
Grayscale document  Title page
Compression :   JPEG big images 

Pagina

 
User defined page size 
Choose one of the predefined standard sizes or select user defined.
Specifies the page size using a standard name or in points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm).
Set the target browser width in pixels (400-1200). This determines the page scaling of images.
   2-Sided   Landscape
   
   
   
Specifies the margin size using points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm). Keep empty for default value.
Left
Middle
Right
Sets the page header to use on body pages.
Left
Middle
Right
Sets the page footer to use on body pages.

Indice

Sets the number of levels in the table-of-contents. Empty for unlimited levels.
   Numbered headings Check to number all of the headings in the document.
Sets the title for the table-of-contents. Empty for default title.
Left
Middle
Right
Sets the page header to use on table-of-contents pages.
Left
Middle
Right
Sets the page footer to use on table-of-contents pages.

Colors

Enter the HTML color for the body (background).
Enter the image file for the body (background). These file has to be an attachments!
Enter the HTML color for the text.
Sets the color of links.
Enables generation of links in PDF files.

Fonts

Set the default size of text.
Set the spacing between lines of text.
Choose the default typeface (font) of text.
Choose the default typeface (font) of headings.
Set the size of header and footer text.
Choose the font for header and footer text.
Change the encoding of the text in document.
Check to embed font in the output file.

PDF

Controls the initial viewing mode for the document.
Document: Displays only the docuemnt pages.
Outline: Display the table-of-contents outline as well as the document pages.
Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Controls the initial layout of document pages on the screen.
Single: Displays a single page at a time.
One column: Displays a single column of pages at a time.
Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
Choose the initial page that will be shown.

Security

Check to number all of the headings in the document.
 Versione stampabile   Modify
 Copy   Annotate
Specifies the document permissions.
Specifies the user password to restrict viewing permissions on this PDF document. Empty for no encryption.
Specifies the owner password to control who can change document permissions etc. If this field is left blank, a random 32-character password is generated so that no one can change the document.

Expert

Specify language to use for date and time format.
Shrink code blocks on page.
Show line numbers for code blocks.
Make spaces visable by dots (·) instead of white spaces.
Make line breaks visable by a extra character (¶) at the end.
Enable this feature if you searching for problems or intent to report a bug report

About

Version 2.4.2 (MoinMoin 1.9.7)


MoinMoin - Generate PDF document using HTMLDOC

This action script generate PDF documents from a Wiki site using
the HTMLDOC (http://www.htmldoc.org) software packages which has
to be preinstalled first.

Copy this script in your's MoinMoin action script plugin directory.

Thanks goes to Pascal Bauermeister who initiated the implementaion.
Lot of things changes since then but the idear using HTMLDOC is the
main concept of this implementation.

Please visit the homepage for further informations:
http://moinmo.in/ActionMarket/PdfAction

@copyright: (C) 2006 Pascal Bauermeister
@copyright: (C) 2006-2010 Raphael Bossek <raphael.bossek@solutions4linux.de>
@license: GNU GPL, see COPYING for details

       

Italiano English
Modifica History Actions

IsoleVPN

OBSOLETE: see: Connessione VPN tra isole ninux in città diverse

Disclaimer

This VPN is mainly used to connect network islands when it is very difficult to build a wired/wireless link ( for example two community networks in very distant city ). It is not intended to connect single persons that wants access internal services via VPN. It is recommended to avoid data traffic over the VPN because it will slow down troubleshooting operation that is one of main use of the VPN itself.

Connect to the VPN between islands with Tinc

1) Install tinc on your Linux Distro ( Debian based: apt-get install tinc, Gentoo based: emerge tinc ) MAKE SURE YOU HAVE AT LEAST TINC 1.0.13

2) Create config dir

mkdir /etc/tinc/isole

3) Create config file

/etc/tinc/isole/tinc.conf

Name = yournickname
ConnectTo = coppermine
ConnectTo = zefiro
ConnectTo = RomaVpnIsole
ConnectTo = BitArno
ConnectTo = heimdall
Mode = switch

Mode switch is required because tinc will operate with a tap interface, needed to run babeld on it.

4) Download hosts keys from our git repository

cd /etc/tinc/isole/
git clone git://github.com/ninuxorg/HostsVpnIsole.git hosts

Optionally to ensure your hosts keys are always updated you can add the following line or something similar to your crontab

0 * * * *       root    cd /etc/tinc/isole/hosts && git pull &> /dev/null

5) Generate a Keypair

tincd -n isole -K

6) Look for a free IP address in the subnet 10.0.5.0/24 and add your self in the table on the GestioneIndirizzi wiki page.

7) Create the file

/etc/tinc/isole/tinc-up

# If your distro supports flexible init networking scripts like Gentoo, you can do it in more elegant way

ip link set dev $INTERFACE up
ip address add dev $INTERFACE HEREYOURIPADDRESS/24
#Adjust MTU
ip link set mtu 1350 dev $INTERFACE
iptables -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu

Where in place of HEREYOURIPADDRESS you must put the IP address choosen at point 6 of this guide

Make the file executable

chmod +x /etc/tinc/isole/tinc-up

8) Send an email to contatti@ninux.org and info@eigenlab.org with your Nickname chosen at point 3 and your generated public key that may look something like.

cat /etc/tinc/isole/hosts/YourHostNickName

Address = Public_Host_Address(not_the_10.0.5.x_one)_If_Available

-----BEGIN RSA PUBLIC KEY-----
TXKAJun1ffoORTQTqhfop1Bfn8BZjKF4efagDCNdQanl8vVMRIqrFb3anXzbUI2O
QVL1lIBom8KgsviE6VywVrF5thYzotqWVKH1K2hwgpZXGVsmimIiFr9hz3pBsOfZ
dL2mmLuZXKx1JujdLq2zVYf1peh7ctcqXuXQfJRJIFGhvPndO9dluQUxtZz8StdY
sVhQcmiyCnmvKNcbyIHQXCA+5zZYNNmu9wIDAQAB
-----END RSA PUBLIC KEY-----

This file has the address ( if available ) and the public key of the VPN node

9) Once you received notification that your public key is authorized you can try to connect

tincd -n isole

If everything worked out you can ping 10.0.5.103. Now configure babeld to use the interface "isole"

It is FUNDAMENTAL to use latest babeld version

11) Configure babeld ( depending on your distro default babeld config file path can be different we will refer to Debian in the example )

edit

/etc/babeld.conf

After editing it should look like this but may vary depending on your setup

## Add interface isole as wired with a fixed cost of 300
interface isole wired true rxcost 300

# Suggested
in le 14 ip 0.0.0.0/0 deny
in ge 23 ip 10.0.0.0/23 deny
in ge 23 ip 10.255.254.0/23 deny
in ge 10 ip 100.64.0.0/10 deny
in ge 23 ip 172.16.0.0/23 deny
in ge 23 ip 172.31.254.0/23 deny
in ge 23 ip 192.168.0.0/23 deny
in ge 23 ip 192.168.254.0/24 deny


# example
## Refuse 131.114.0.0/16 route
#in ip 131.114.0.0/16 deny

# example ( this is useful if your adsl router have a subnet like this )
## Refuse route with a prefix lenght great or equal 24 matching with 192.168.2.0/24
# in ge 24 ip 192.168.2.0/24 deny

# example ( this is useful if you are using another routing protocol on your island )
## Redistribute route in the 10/8 subnet from another routing protocol that have proto 157
# redistribute ip 10.0.0.0/8 proto 157

# Mandatory
## Allow announcing route 10.0.5.0/24
redistribute ip 10.0.5.0/24 allow

## Allow here the sharing of route you want share
## for example
# redistribute ip 10.0.0.0/8 allow

## Deny announcing all other local route 
redistribute local deny

OLSRd configuration for Babeld

1) Install git, build-essentials, flex and bison for compile the olsrd version with ad-hoc plugin that permit intercomunication between olsrd and babeld.

2) download ninux.org gihub repository:

git clone git://github.com/ninuxorg/olsrd.git

3) when enter olsrd folder and switch to new plugin branch:

git checkout proto_plugin_rc3

4) compile olsrd and his plugins:

make
make libs

5) install olsrd and plugins:

make install
make install_libs

6) now go to /etc/olsrd.conf and insert  RtProto 157  inside the config on top, before hna4 entries. (this mark all routes learned from olsr network with proto 157, in this way babeld can recognize olsr routes)

CAUTION AT THIS POINT

7) If you want that olsrd redistribute routes from babeld you need to insert this configuration inside the file:

LoadPlugin "olsrd_proto.so.0.2"
{
        PlParam "proto_no" "42"
}

IF BABELD IS IMPROPERLY CONFIGURED THIS OPTION CAN CREATE A BLACKHOLE! WATCH OUT!

8) now you only need to configure olsrd to start on boot with babeld and tincd.