|
Dimensione: 1730
Commento:
|
Dimensione: 1954
Commento:
|
| Le cancellazioni sono segnalate in questo modo. | Le aggiunte sono segnalate in questo modo. |
| Linea 38: | Linea 38: |
| 6) Get an IP address in the subnet 10.0.1.0/24 and add your self in the table on this wiki page: GestioneIndirizzi | 7) Get an IP address in the subnet 10.0.1.0/24 and add your self in the table on this wiki page: GestioneIndirizzi |
| Linea 40: | Linea 40: |
| 7) Create che file {{{/etc/tinc/ninux/tinc-up}}} | 8) Create che file {{{/etc/tinc/ninux/tinc-up}}} |
| Linea 50: | Linea 50: |
| {{{chmod +x /etc/tinc/ninux/tinc-up | {{{chmod +x /etc/tinc/ninux/tinc-up}}} |
| Linea 52: | Linea 52: |
| 7) Send an email to zioproto@gmail.com with your Nickname choosen at point 3 and your generated '''public''' key so we can authorize you in the VPN server. | 9) Send an email to zioproto@gmail.com with your Nickname choosen at point 3 and your generated '''public''' key so we can authorize you in the VPN server. 10) Once you received notification that your public key is authorized you can try to connect {{{ tincd -n ninux }}} If everything worked out you can ping 10.0.1.1. Now configure olsr to use the interface "ninux" |
Connect to Ninux Network with Tinc VPN
1) Install tinc on your Linux (e.g. apt-get install tinc)
2) mkdir /etc/tinc/ninux
3) Create /etc/tinc/ninux/tinc.conf
Name = yournickname ConnectTo = Norimberga Mode = switch
Please pick a unique yournickname. Norimberga is our hub server. Mode switch is required because tinc will operate with a tap interface, needed to run olsr on it.
4) Generate a Keypair tincd -n ninux -K
5) Create the hosts folder mkdir /etc/tinc/ninux/hosts/
6) Create the file /etc/tinc/ninux/hosts/Norimberga
This file has the address and the public key of the server
Address = svn.ninux.org -----BEGIN RSA PUBLIC KEY----- MIIBCgKCAQEA30bZWtIej9kj837Eb8C+nxvEXfy4Jly41tuJYfzpJiP/pTQGaPyF XDEdfwAq8qJpfLaRfKl0pQ9rbDo4zjSlNW8e/5BxTnobXHcvSD9sm8bNAME2qBkI plmeWt4RvDmEKDrJWyUIoyKyaTcCkXpfHslTJSBBj7TSjYX9SCfTkSS3GjNDWMjc C02i2+ZB3balcR+Ea046l/GVFp0htxrUFxew5RDXPmmaiQRF6cpm3fMNtdq9ixz+ uJNjmfHW/lHk4KMUj6KMLca9mS4TWsFxLYmP0jZi7lD2hA3dNCW4nua8HHYPwj+X Mh/vucAMckowzaf+51bGD+o8HVuM1hm4TwIDAQAB -----END RSA PUBLIC KEY-----
7) Get an IP address in the subnet 10.0.1.0/24 and add your self in the table on this wiki page: GestioneIndirizzi
8) Create che file /etc/tinc/ninux/tinc-up
ip link set dev ninux up ip a a dev ninux HEREYOURIPADDRESS/24 broadcast 10.0.1.255
Where in place of HEREYOURIPADDRESS you must put the IP address choosen at point 6 of this guide
Make the file executable chmod +x /etc/tinc/ninux/tinc-up
9) Send an email to zioproto@gmail.com with your Nickname choosen at point 3 and your generated public key so we can authorize you in the VPN server.
10) Once you received notification that your public key is authorized you can try to connect
tincd -n ninux
If everything worked out you can ping 10.0.1.1. Now configure olsr to use the interface "ninux"