Ubiquiti RouterStation
- Indirizzo di default: 192.168.1.20
- user: root password: ubnt
Compilare un'immagine di OpenWrt
- per il build di openwrt scegliere:
- architettura ar71xx
- target platform ubiquiti routerstation
Immagine pronta
Flashare
- non c'e' bisogno di usare mkfwimage
- far partire la routerboard tenendo premuto il tasto di reset per qualche secondo. La routerboard non fa lampeggiare nessun led ma in realta' e' pronta.
- flashare via tftp (client e non server come si dice sul forum dell'ubiquiti)
$ tftp 192.168.1.20 tftp> verbose Verbose mode on. tftp> bin mode set to octet tftp> put openwrt-ar71xx-ubnt-rs-squashfs.bin putting openwrt-ar71xx-ubnt-rs-squashfs.bin to 192.168.1.20:openwrt-ar71xx-ubnt-rs-squashfs.bin [octet] Sent 2032024 bytes in 5.0 seconds [3254323 bit/s] tftp>
- Aspettare un po'. Togliere e rimettere il cavo PoE.
- entrare in telnet su 192.168.1.1