Input

book: Create a structured PDF document with headings, chapters, etc.
webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output.
continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title of the document for the front page.
Extract the first heading of the document and use it as title. If checked the title field has no effect.
The title image or HTML page. These file has to be an attachments!
Specify document version to be displayed on the title page.
Intellectual property owner of this document.
Copyright notice for this document.
Information about who and when modified the document are applied at the end.

Output

Specifies the output format.
Grayscale document  Title page
Compression :   JPEG big images 

Pagina

 
User defined page size 		 Choose one of the predefined standard sizes or select user defined.
Specifies the page size using a standard name or in points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm).
Set the target browser width in pixels (400-1200). This determines the page scaling of images.
   2-Sided   Landscape
   
   
   
Specifies the margin size using points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm). Keep empty for default value.
Left
Middle
Right
Sets the page header to use on body pages.
Left
Middle
Right
Sets the page footer to use on body pages.

Indice

Sets the number of levels in the table-of-contents. Empty for unlimited levels.
   Numbered headings Check to number all of the headings in the document.
Sets the title for the table-of-contents. Empty for default title.
Left
Middle
Right
Sets the page header to use on table-of-contents pages.
Left
Middle
Right
Sets the page footer to use on table-of-contents pages.

Colors

Enter the HTML color for the body (background).
Enter the image file for the body (background). These file has to be an attachments!
Enter the HTML color for the text.
Sets the color of links.
Enables generation of links in PDF files.

Fonts

Set the default size of text.
Set the spacing between lines of text.
Choose the default typeface (font) of text.
Choose the default typeface (font) of headings.
Set the size of header and footer text.
Choose the font for header and footer text.
Change the encoding of the text in document.
Check to embed font in the output file.

PDF

Controls the initial viewing mode for the document.
Document: Displays only the docuemnt pages.
Outline: Display the table-of-contents outline as well as the document pages.
Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Controls the initial layout of document pages on the screen.
Single: Displays a single page at a time.
One column: Displays a single column of pages at a time.
Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
Choose the initial page that will be shown.

Security

Check to number all of the headings in the document.
 Versione stampabile   Modify
 Copy   Annotate		 Specifies the document permissions.
Specifies the user password to restrict viewing permissions on this PDF document. Empty for no encryption.
Specifies the owner password to control who can change document permissions etc. If this field is left blank, a random 32-character password is generated so that no one can change the document.

Expert

Specify language to use for date and time format.
Shrink code blocks on page.
Show line numbers for code blocks.
Make spaces visable by dots (·) instead of white spaces.
Make line breaks visable by a extra character (¶) at the end.
Enable this feature if you searching for problems or intent to report a bug report

About

Version 2.4.2 (MoinMoin 1.9.7)


MoinMoin - Generate PDF document using HTMLDOC

This action script generate PDF documents from a Wiki site using
the HTMLDOC (http://www.htmldoc.org) software packages which has
to be preinstalled first.

Copy this script in your's MoinMoin action script plugin directory.

Thanks goes to Pascal Bauermeister who initiated the implementaion.
Lot of things changes since then but the idear using HTMLDOC is the
main concept of this implementation.

Please visit the homepage for further informations:
http://moinmo.in/ActionMarket/PdfAction

@copyright: (C) 2006 Pascal Bauermeister
@copyright: (C) 2006-2010 Raphael Bossek <raphael.bossek@solutions4linux.de>
@license: GNU GPL, see COPYING for details

       

Italiano English
Modifica History Actions

agif

Le sedi di Ninux sono:

a Roma presso il FusoLab

  • Fusolab

a Pisa all'EigenLab

  • Eingelab

a Cosenza presso la sede dell'Hacklab Cosenza

  • HLCS

a Catanzaro presso la sede dell'Hacklab Catanzaro

  • HLCZ

a Firenze presso l'exfila

  • exfila

a Bologna presso il makerspace di RaspiBO

  • NinuxBO

Ninux.org partecipa al World IPv6 day

  • WorldIpv6Day

Telecom italia agif modem con openwrt

Byte sparsi sull'hack per info contatti @ ninux.org

L'agif ha un soc analog device architettura fusiv v160, il che non è upstream nel kernel ma sul sito di zoobab si è trovato un kernel moddato da cui ho estratto una leggerissima patch di 50MB (http://test.ninux.org/~claudyus/agif/) e il cui lavoro di vivisezione è in corso (vedi mio github)

Boot log: 

FUSIV-DIALFACE # printenv


author=Leo@analog devices
bootcmd=jboot
bootdelay=1
baudrate=57600
preboot=echo;echo Type "h" for HELP.  Have fun!;echo
verify=n
bootdelay=1
resetdelay=15
ipaddr=192.168.1.199
serverip=192.168.1.100
ethaddr=00:17:37:da:b1:de
netboot=dhcp;tftp;run netargs; bootm
nfsargs=setenv bootargs root=/dev/nfs ip=dhcp
localargs=setenv bootargs root=/dev/mtdblock2 ip=dhcp

addmisc=setenv bootargs $(bootargs) console=ttyS0,$(baudrate) read-only=readonly
netargs=run nfsargs addmisc
flash_nfs=run nfsargs addmisc;bootm $(kernel_addr)
flash_local=run localargs addmisc;bootm $(kernel_addr)
netboot_initrd=dhcp;tftp;tftp 80600000 initrd;setenv bootargs root=/dev/ram ramdisk_size=8192 ip=dhcp;run addmisc;bootm 80400000 80600000
rootpath=/export/miniroot-mipsel
autoload=no
myfs_start=0xbfd40000
kernel_addr=BFC60000
ramdisk_addr=B0100000
u-boot=u-boot.bin
bootfile=kernel.img
load=dhcp;tftp 80400000 $(u-boot)
resetcmd=erase BFF80000 BFFDFFFF ; reset
load_kernel=dhcp;tftp 80400000 $(bootfile)
update_uboot=tftp 80400000 $(u-boot); protect off BF000000 BF03FFFF; erase BF000000 BF03FFFF; cp.b 80400000 BF000000 $(filesize)
update_kernel=run load_kernel;erase BFC60000 BFD5FFFF;cp.b 80400000 BFC60000 $(filesize)
initenv=erase BF040000 BF05FFFF
stdin=serial
stdout=serial
stderr=serial
ethact=voxEmac


Environment size: 1287/131068 bytes



U-Boot 1.1.4 for FUSIV chipset by Ikanos(Jun 16 2009 - 15:49:51)

CPU: IKANOS Fusiv 160 Family
Ethernet Switch hardware reset
DRAM:  64 MB
Flash: 16 MB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   voxEmac

Type "h" for HELP. Have fun!


Hit any key to stop autoboot:  0

getting active image........active image seems to be 0
## Booting image at bf080094 ...
   Image Name:   openrg_AGIF_1.2.0d-cfif_linux-2.
   Created:      2009-12-21  14:23:39 UTC

   Image Type:   MIPS Linux Kernel Image (LZMA compressed)
   Data Size:    2049385 Bytes =  2 MB
   Load Address: 80010000
   Entry Point:  802b7000
   CRAMFS start: bf274680
   CRAMFS size:  4c0980
   Uncompressing Kernel Image ... OK

Starting kernel ...

6 febbraio 2011

Praticamente usando la toolchain del livebox2 e compilando il kernel 2.6.15 che in realtà è un 2.6.15-rc5 si ottiene un kernel da 29MB e un po di cavoli

a questo punto si riduce con objbump e si tagga con mkimage

Su uboot ho usato: 

setenv bootargs console=ttyS0,57600 rootwait
tftp 80400000 kimage.cla

con questi risultati: 

FUSIV-DIALFACE #

Using voxEmac device
TFTP from server 192.168.1.100; our IP address is 192.168.1.199
Filename 'kimage.cla'.
Load address: 0x80400000
Loading: #################################################################
         #################################################################

         #################################################################
         #################################################################
         #################################################################

         #################################################################
         #################################################################
         #################################################################
         #################################################################
done
Bytes transferred = 2993168 (2dac10 hex)
FUSIV-DIALFACE # bootm

## Booting image at 80400000 ...
   Image Name:   linux-2.6
   Created:      2011-02-06  16:05:18 UTC
   Image Type:   MIPS Linux Kernel Image (uncompressed)
   Data Size:    2993104 Bytes =  2.9 MB
   Load Address: 80010000
   Entry Point:  802b7000
   CRAMFS:       inside this image

insomma davvero deludente.

Anche con load/entry adress come da kernel originale non cambia nulla.

se volete provare kernel e kimage sono su http://test.ninux.org/~claudyus/alice_agif

7 febbraio 2011

OPENWRT is cooming

Ok ci siamo, dopo 3 gg di intenso lavoro ecco il primo repository per ikanos: http://test.ninux.org/~claudyus/alice_agif/openwrt/

Testare il kernel

Per testare il kernel scaricato dal link di sopra si deve taggare per uboot, usando mkimage puoi usare questo comando: 

mkimage -A mips -T kernel -C none -a 0x80010000 -e 0x802b7000 -n linux-2.6 -d vmlinuz kimage.cla

Il che genera un file, kimage.cla, che è possibile trasferire via tftp sulla scheda come mostrato nell'aggiornamento del 6 febbraio.

8 febbraio 2011

Nulla è stato tentato oggi.

Avvolte per chiarirsi le idee su di un problema è meglio distaccarsene...

alt text

10 febbraio 2011

Il progetto freetz ha un kernel molto interessate alla versione 2.6.19.2 con supporto per adi_fusiv ma non compila er vox160, all'interno del progetto è usato per vox180...

Intanto l'ho messo al solito indirizzo, un passo avanti.

Ora un passo indietro... parlando con Florian forse è uscito un problema con la ethernet. 

Hello Claudio,

On Thursday 10 February 2011 10:07:23 Claudio wrote:
> Hi all,
> someone of you is know or is part of http://freetz.org/ project?
> I found a alicegate [1] variant [2] in italy that is based on fusiv
> chip, the chip support is not upstream but downloading freetz sdk I
> found a patched kernel 2.6.19.2 that can be a start point to develop
> this paltform.
>
> Other boards are based on same chip, in france livebox and in belgium bbox2
> [3]

Keep in mind that just like Broadcom BCM63xx, you might be able to get the
basic board support in a working state (CPU handling, UART, USB ...) but the
DSL remain as blobs, ethernet might as well.

Note that you can also find support for the Ikanos Fusiv DSL platform here:
http://www.livebox-
opensource.com/Products/LiveBox/LiveBox1.2/Thomson/vR7298/linux-2.6.12.tar.bz2

The Ikanos Fusiv platform uses a Lexra CPU, which is a MIPS compatible clone,
excep that it lacks support for 4 patented instructions, so a patched
toolchain is required to build a working kernel.

ethernet driver as blobs?!?!?!? MEGA FAIL

E un passo avanti ancora:

pog2 dal forum http://forum.zibri.org ha estratto il kernel dalla flash l'ha taggaro e ricaricato in ram e, NOTIZIA, ha scritto qualcosa sulla seriale!