Input

book: Create a structured PDF document with headings, chapters, etc.
webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output.
continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title of the document for the front page.
Extract the first heading of the document and use it as title. If checked the title field has no effect.
The title image or HTML page. These file has to be an attachments!
Specify document version to be displayed on the title page.
Intellectual property owner of this document.
Copyright notice for this document.
Information about who and when modified the document are applied at the end.

Output

Specifies the output format.
Grayscale document  Title page
Compression :   JPEG big images 

Pagina

 
User defined page size 		 Choose one of the predefined standard sizes or select user defined.
Specifies the page size using a standard name or in points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm).
Set the target browser width in pixels (400-1200). This determines the page scaling of images.
   2-Sided   Landscape
   
   
   
Specifies the margin size using points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm). Keep empty for default value.
Left
Middle
Right
Sets the page header to use on body pages.
Left
Middle
Right
Sets the page footer to use on body pages.

Indice

Sets the number of levels in the table-of-contents. Empty for unlimited levels.
   Numbered headings Check to number all of the headings in the document.
Sets the title for the table-of-contents. Empty for default title.
Left
Middle
Right
Sets the page header to use on table-of-contents pages.
Left
Middle
Right
Sets the page footer to use on table-of-contents pages.

Colors

Enter the HTML color for the body (background).
Enter the image file for the body (background). These file has to be an attachments!
Enter the HTML color for the text.
Sets the color of links.
Enables generation of links in PDF files.

Fonts

Set the default size of text.
Set the spacing between lines of text.
Choose the default typeface (font) of text.
Choose the default typeface (font) of headings.
Set the size of header and footer text.
Choose the font for header and footer text.
Change the encoding of the text in document.
Check to embed font in the output file.

PDF

Controls the initial viewing mode for the document.
Document: Displays only the docuemnt pages.
Outline: Display the table-of-contents outline as well as the document pages.
Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Controls the initial layout of document pages on the screen.
Single: Displays a single page at a time.
One column: Displays a single column of pages at a time.
Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
Choose the initial page that will be shown.

Security

Check to number all of the headings in the document.
 Versione stampabile   Modify
 Copy   Annotate		 Specifies the document permissions.
Specifies the user password to restrict viewing permissions on this PDF document. Empty for no encryption.
Specifies the owner password to control who can change document permissions etc. If this field is left blank, a random 32-character password is generated so that no one can change the document.

Expert

Specify language to use for date and time format.
Shrink code blocks on page.
Show line numbers for code blocks.
Make spaces visable by dots (·) instead of white spaces.
Make line breaks visable by a extra character (¶) at the end.
Enable this feature if you searching for problems or intent to report a bug report

About

Version 2.4.2 (MoinMoin 1.9.7)


MoinMoin - Generate PDF document using HTMLDOC

This action script generate PDF documents from a Wiki site using
the HTMLDOC (http://www.htmldoc.org) software packages which has
to be preinstalled first.

Copy this script in your's MoinMoin action script plugin directory.

Thanks goes to Pascal Bauermeister who initiated the implementaion.
Lot of things changes since then but the idear using HTMLDOC is the
main concept of this implementation.

Please visit the homepage for further informations:
http://moinmo.in/ActionMarket/PdfAction

@copyright: (C) 2006 Pascal Bauermeister
@copyright: (C) 2006-2010 Raphael Bossek <raphael.bossek@solutions4linux.de>
@license: GNU GPL, see COPYING for details

       

Italiano English
Modifica History Actions

olsrmacosx

Le sedi di Ninux sono:

a Roma presso il FusoLab

  • Fusolab

a Pisa all'EigenLab

  • Eingelab

a Cosenza presso la sede dell'Hacklab Cosenza

  • HLCS

a Catanzaro presso la sede dell'Hacklab Catanzaro

  • HLCZ

a Firenze presso l'exfila

  • exfila

a Bologna presso il makerspace di RaspiBO

  • NinuxBO

Ninux.org partecipa al World IPv6 day

  • WorldIpv6Day

OLSR daemon for MacOsX

Requirements: xCode (Lastest Version). You can download it from here

Download & Installation

Donwload source code from olsr.org (click here)

You can also download it from a shell with:

wget http://www.olsr.org/releases/0.6/olsrd-0.6.0.tar.gz

Extract it with 

tar -xzvf olsrd-0.6.0.tar.gz

cd olsrd-0.6.0

To build: 

make

To install(as root): 

make install

To make plugins (needed) 

make libs

To install plugins 

make install_libs

To delete object files run: 

make clean

Optionally, to clean all generated files: 

make uberclean

you can see the message:

[..cut..] 

========= C O N F I G U R A T I O N - F I L E ============
olsrd uses the configfile /etc/olsrd.conf

[..cut..]

This means that you have to modify this file to run Olsrd Daemon. 

vi /etc/olsrd.conf

This is the default config file of OLSR :

Put your olsr interfaces here in the config file: 

Interface "<OLSRd-Interface1>" "<OLSRd-Interface2>"

#
# OLSR.org routing daemon config file

# This file contains the usual options for an ETX based
# stationary network without fisheye
# (for other options see olsrd.conf.default.full)
#
# Lines starting with a # are discarded
#### ATTENTION for IPv6 users ####
# Because of limitations in the parser IPv6 addresses must NOT
# begin with a ":", so please add a "0" as a prefix.

###########################
### Basic configuration ###
###########################
# keep this settings at the beginning of your first configuration file

# Debug level (0-9)

# If set to 0 the daemon runs in the background, unless "NoFork" is set to true

# (Default is 1)
# DebugLevel  1

# IP version to use (4 or 6)
# (Default is 4)

# IpVersion 4
#################################
### OLSRd agent configuration ###
#################################
# this parameters control the settings of the routing agent which are not
# related to the OLSR protocol and it's extensions
# FIBMetric controls the metric value of the host-routes OLSRd sets.
# - "flat" means that the metric value is always 2. This is the preferred value
#   because it helps the linux kernel routing to clean up older routes
# - "correct" use the hopcount as the metric value.
# - "approx" use the hopcount as the metric value too, but does only update the
#   hopcount if the nexthop changes too
# (Default is "flat")
# FIBMetric "flat"
#######################################
### Linux specific OLSRd extensions ###
#######################################
# these parameters are only working on linux at the moment, but might become
# useful on BSD in the future
# SrcIpRoutes tells OLSRd to set the Src flag of host routes to the originator-ip
# of the node. In addition to this an additional localhost device is created
# to make sure the returning traffic can be received.
# (Default is "no")
# SrcIpRoutes no
# Specify the proto tag to be used for routes olsr inserts into kernel
# currently only implemented for linux
# valid values under linux are 1 .. 254
# 1 gets remapped by olsrd to 0 UNSPECIFIED (1 is reserved for ICMP redirects)
# 2 KERNEL routes (not very wise to use)
# 3 BOOT (should in fact not be used by routing daemons)
# 4 STATIC
# 8 .. 15 various routing daemons (gated, zebra, bird, & co)
# (defaults to 0 which gets replaced by an OS-specific default value
# under linux 3 (BOOT) (for backward compatibility)
# RtProto 0
# Activates (in IPv6 mode) the automatic use of NIIT
# (see README-Olsr-Extensions)
# (default is "yes")

# UseNiit yes

# Activates the smartgateway ipip tunnel feature.
# See README-Olsr-Extensions for a description of smartgateways.
# (default is "yes")

# SmartGateway yes

# Allows the selection of a smartgateway with NAT (only for IPv4)
# (default is "yes")

# SmartGatewayAllowNAT yes

# Defines what kind of Uplink this node will publish as a
# smartgateway. The existence of the uplink is detected by
# a route to 0.0.0.0/0, ::ffff:0:0/96 and/or 2000::/3.
# possible values are "none", "ipv4", "ipv6", "both"
# (default is "both")

# SmartGatewayUplink "both"

# Specifies if the local ipv4 uplink use NAT
# (default is "yes")

# SmartGatewayUplinkNAT yes

# Specifies the speed of the uplink in kilobit/s.
# First parameter is upstream, second parameter is downstream
# (default is 128/1024)

# SmartGatewaySpeed 128 1024

# Specifies the EXTERNAL ipv6 prefix of the uplink. A prefix
# length of more than 64 is not allowed.
# (default is 0::/0

# SmartGatewayPrefix 0::/0

##############################
### OLSR protocol settings ###
##############################
# HNA (Host network association) allows the OLSR to announce
# additional IPs or IP subnets to the net that are reachable
# through this node.
# Syntax for HNA4 is "network-address    network-mask"
# Syntax for HNA6 is "network-address    prefix-length"
# (default is no HNA)

Hna4
{
# Internet gateway
# 0.0.0.0   0.0.0.0
# specific small networks reachable through this node
# 15.15.0.0 255.255.255.0
}

Hna6
{
# Internet gateway
#   0::                     0
# specific small networks reachable through this node
#   fec0:2200:106:0:0:0:0:0 48
}

################################
### OLSR protocol extensions ###
################################
# Link quality algorithm (only for lq level 2)
# (see README-Olsr-Extensions)
# - "etx_float", a floating point  ETX with exponential aging
# - "etx_fpm", same as ext_float, but with integer arithmetic
# - "etx_ff" (ETX freifunk), an etx variant which use all OLSR
#   traffic (instead of only hellos) for ETX calculation
# - "etx_ffeth", an incompatible variant of etx_ff that allows

#   ethernet links with ETX 0.1.
# (defaults to "etx_ff")

# LinkQualityAlgorithm    "etx_ff"

# Fisheye mechanism for TCs (0 meansoff, 1 means on)
# (default is 1)

LinkQualityFishEye  0

#####################################
### Example plugin configurations ###
#####################################
# Olsrd plugins to load
# This must be the absolute path to the file
# or the loader will use the following scheme:
# - Try the paths in the LD_LIBRARY_PATH
#   environment variable.
# - The list of libraries cached in /etc/ld.so.cache
# - /lib, followed by /usr/lib
#
# the examples in this list are for linux, so check if the plugin is
# available if you use windows/BSD.
# each plugin should have a README file in it's lib subfolder
# LoadPlugin "olsrd_txtinfo.dll"

LoadPlugin "olsrd_txtinfo.so.0.1"

{
 . # port number the txtinfo plugin will be listening, default 2006
#   PlParam     "port"   "81"
 . # ip address that can access the plugin, use "0.0.0.0" # to allow everyone
 PlParam     "Accept"   "127.0.0.1"
}

#############################################
### OLSRD default interface configuration ###
#############################################
# the default interface section can have the same values as the following
# interface configuration. It will allow you so set common options for all
# interfaces.

InterfaceDefaults {
 . # Ip4Broadcast      255.255.255.255
}

######################################
### OLSRd Interfaces configuration ###
######################################
# multiple interfaces can be specified for a single configuration block
# multiple configuration blocks can be specified
# WARNING, don't forget to insert your interface names here !
Interface "<OLSRd-Interface1>" "<OLSRd-Interface2>"

{

 . # Interface Mode is used to prevent unnecessary # packet forwarding on switched ethernet interfaces # valid Modes are "mesh" and "ether" # (default is "mesh") # Mode "mesh"

}

Save the file with

ESC + : + wq

Try to run olsr with

sudo olsrd -f /etc/olsrd.conf